Tapping Sleeve and Valve Assembly
This PDF document may not meet current accessibility standards (WCAG 2.1 AA) and may not be fully usable with assistive technologies.
If you require access to the information in a more accessible format, please e-mail webstaff@johnstonnc.gov and we will provide an alternative version as soon as possible. A machine-generated text version is also available below.
We apologize for any inconvenience and appreciate your understanding as we work toward full accessibility compliance.
If the document does not display above, download the PDF.
Text version (machine-generated from the PDF)
CONCRETE BLOCKINGEXIST WATER MAINC_TAPPING SLEEVE__,VALVE WITH VALVE BOX aNOTES1 TAPPING SLEEVE SHALL BE FABRICATED OFTYPE 304 SS AND PROVIDE A 360° SEALAROUND EXISTING PIPE WITH FULLCIRCUMFERENTIAL GASKET2 TAPPING SLEEVE SHALL BE JCM 432, MUELLERH-304, FORD FTSS, ROMAC ST III ORAPPROVED EQUAL3 TAPPING SLEEVES ARE ONLY ALLOWED WHENLEG IS SMALLER THAN THE MAIN LINE- NOT TQOSCALEOO~-SCi'see ee DrawnBy | 1 'ar PAGE[Checked By; |__| | JOHNSTONCouNTY f ffm STANDARD DETAIL[ApprovedBy{ | Department of Public Utilities ai a 83Scale PO Box 2263 eae 4 Tapping Sleeve andPf Smithfield, NC 27577 eo SE Valve Assembly